Rice

To effectively undertake seed saving:

• Step 1: Communicate with national agricultural extension and local farmers regarding seed harvesting timing and practices for local crop species.
• Step 2: Clear field and sow desired crop using climate smart agriculture practices.
• Step 3: Monitor plant life cycle and ensure that seeds are extracted correctly and are not spoiled in the process. Employ local expertise to ensure seed harvesting is carried out correctly.
• Step 4: Post-harvest, seeds should be adequately dried and then transferred to proper storage facilities.
• Step 5: store seeds in dry, cool, and dark locations. This will prevent them from spoil. Different strategies for seed storage are implemented around the region so local expertise should be sought.
• Step 6: Ensure that pests are excluded from storage areas to prevent loss or spoil (Technical Brief 61-65).
• Step 7: Community seed banks or seed trading should be established to allow farmers to integrate different varieties into their farming system that are resilient to local climatic conditions

To effectively undertake leverage traditional seed characteristics, or improved crop varieties  the following should be carried out:

• Step 1: Prior to selecting seed varieties, perform a Cost Benefit Analysis (CBA) to identify how crops will perform and their benefits compared to the costs of the seed, considering the following:
  • Local  farming system(s): land availability per household, crops traditionally grown, access to inputs such as fertilisers,
  • Local environmental conditions: soil conditions, disease, pests, climatic conditions, occurrence of flooding/droughts and other natural disasters.
  • How climate change has impacted or will impact the farming system and how crop variety selection can be a climate- smart practice.
  • Local access to seeds – is seed collected at the householder level, do neighbours exchange seeds, do farmers have access to commercially produced seeds?  Are the costs for accessing commercial, improved seeds manageable or prohibitive? The CBA should weigh the benefits of a new seed against perceived actual or transactional costs for selecting a new seed.
• Step 2: Obtain information and guidance from local experts, lead farmers, and government regarding best varieties to grow.
• Step 3: Evaluate results of the CBA and select appropriate seeds that match the farm system/requirements, and available financial resources/access to credit.
• Step 4: Plant test plots of selected seeds to understand if benefits are realised and demonstrate outcomes with farmers, showing possible alternatives and discuss implementation.
• Step 5: Following full demonstration and discussion with farmers, implement at farm level – planting the first crop in accordance with guidance provided by seed provider, or traditional knowledge.

Consider in-country seed sources to access different varieties through local extension or research services. When buying seeds ensure that the seeds are adequately dry and look for seed that is certified by a national seed laboratory to ensure that the variety is the highest quality possible. Seeds should be properly stored to avoid high temperatures and humid air to reduce chances of early germination.

To effectively undertake weed control measures:

• Step 1: Review weed control measures - crop rotation, intercropping, cover crops, mulching, seed-bed preparation, livestock grazing, seed/variety selection, mowing, hand-weeding and adjustments to tillage practices - and determine which methods are available and appropriate for the farming system and farmer. Two or more of these techniques can be applied to assist in ensuring farmers have more chance of success. Understand possible negative impacts of each weed control method.
• Step 2: Improve weed identification knowledge in specific areas.
• Step 3: Prevent weeds from spreading – clean clothes, animals, machinery, vehicles to limit weed transport; use only well stored/rotted manure (4-5 months) (Knowledge Product 16), include fencing, irrigation and other farm ‘breaks’ where possible
• Step 4: Apply a combination of weed control methods including – cover crops (Technical Brief 15), mulching, intercropping (Technical Brief 07), crop rotation (Technical Brief 09), livestock grazing, seed selection (Technical Brief 20), mowing, hand-weeding. Try to avoid the application of herbicides, tillage and burning.
• Step 5: monitor and document most effective weed management strategies for each farmer, and use lessons learned from the area with other farmers where applicable.

To effectively approach to terracing construction:

• Step 1: Measure slope angle – should not exceed 25 degrees and soils should be at least 0.5 metres deep.
• Step 2: Plot the contours – see Technical Brief 16 Contour Planting for instructions for staking-out contours, and the diagram below for use of a t-stick to measure the distance between contours.
• Step 3: Start at the lowest terrace. Dig a trench vertically below the next contour, and then dig outwards to the lowest contour. Remove soil and place downhill below the lowest contour.
• Step 4: Compact soil on constructed terrace.
• Step 5: Work should then progress upslope, emptying top-soil on to the terrace below to provide soil for planting.
• Step 6: Strengthen riser buttress walls (back-walls) with stones, compacted soil, or by planting grass or trees.
• Step 7: Terrace-end drainage should also be considered, so water does not pool too heavily. The down-field gutters can be lined with stones to reduce erosion

Detailed diagrams and tables for calculating terrace dimensions are provided in Peace Corps 1986, Soil conservation techniques for hillside farming.

Additional guidance can be sought from videos provided by Access Agriculture: SLM02 Fanya Juu terraces. The Kenyan example provided is also up-slope terrace construction but using a different method where a trench is dug, and the loose topsoil is thrown up-hill (fanya juu in Kiswahili) which forms a ridge that flattens over time.

To effectively undertake contour planting:

• Step 1: Construct an A-frame that has a plumb-line with a rock hanging down the centre. The base of the A-frame should be 90 cm.
• Step 2: Calibrate the A-frame on flat ground. Ensure that both legs are on the ground. Mark where the plumb line meets the cross bar.
• Step 3: On a slope, working perpendicular to the slope, plant one leg of the A-frame and swing the other leg around until the plumb line meets the mark on the cross bar. Drive a stake into the ground where the first ‘planted’ leg is and continue the process across the slope.
• Step 4: Once the extent of the contour has been staked, tie a string from post-to-post across the slope; this identifies the contour to be planted.
• Step 5: Plant selected crops, develop contour ridges or plant contour strips along the contour line.
• Step 6: Subsequent contours should be spaced 3-5 m up or downhill of the preceding contour line. To determine the length between contour lines, measure off the top of each stake to a stake up or downhill with a tape measure or accurately measured third stick.
• Step 7: Contour ridges can be implemented like Water Spreading Bunds (Technical Brief 28) to form ridges of soil that are formed by tilling or ploughing and can be left after land preparation to further prevent erosive forces. Crops can be planted between these ridges.
• Step 8: The planting of contour strips can be implemented by planting grasses or hedges 20 m (shallow slopes) to 10 m (steeper slopes) apart up or downhill, similar to Trash Lines (Technical Brief 14). This intercropping allows for erosion control and can be used as fodder for livestock.

Without a topographic survey, this technology may require trial and error to begin with, to see how rainfall and run-off responds to the contouring. To effectively implement erosion control measures the following should be carried out:

• Step 1: Perform a thorough local study of the landscape, soils, land use and erosive processes that most impact the area: steep slopes, flood plains, high winds etc.
• Step 2: Source a large number of stones, preferably five to ten centimetres square blocks (from a quarry) or five to ten-centimetre diameter cobbles (from a river-bed). You will need 30 to 50 tonnes of stone per hectare for contour bunds approximately 300 metres long.
• Step 3: Mark out contours, as discussed in Technical Brief 16 Contour Planting.
• Step 4: In larger fields with shallower slopes, place stones in rows of two along contour line, interlocking alternately, burying the lower half. The bunds can be between 25 and 40 metres apart. On steeper slopes, stack and bury stones against or in vertical/near vertical walls of contours much closer together (five to ten metres apart) to reinforce them.
• Step 5: Make sure that stone bunds follow the contours from one side of the field to the other, ensuring that no ‘pour’ points (larger gaps) exist along the way, lining the drainage channel or weir from one contour to the next with stones to avoid or reduce scouring in these locations.
• Step 6: Following, and if possible, during rainfall events, check the stability of the slope, adjusting stone bunds where necessary.
• Step 7: At the end of the rainy season and again following harvest, review the performance of the technology, and prepare for the next growing season.

Switching to no-till or reduced tillage should be planned at least a year in advance so preparations can be made necessary implements can be obtained. Implements should match farm labour availability. You will also need to decide if no till or reduced tillage methods are appropriate based on farm area and desired crops, and start with a small area to determine feasibility. Cereal and legume crops are suitable for no tillage while vegetables and other crops often require some tillage – i.e. reduced tillage.

There are two forms of no-tillage, conventional and organic. Conventional no-tillage includes the application of herbicides to manage weeds, prior to and after planting. Organic no-tillage does not incorporate the use of herbicides, but includes other methods for controlling weeds, including cover crops, crop rotation and free-range livestock. Organic no-tillage is more suitable as it assists mitigate any climate change impacts on the farm.

No till

• Step 1: Prepare fields using conventional (herbicide application) or organic processes include cover crop (Technical Brief 15) and crop rotation (Technical Brief 09).
• Step 2: Test soils – aiming to balance nutrient and pH levels. In the case of acidic soils, add small amounts of lime each year.
• Step 3: Avoid soils with bad drainage, as they become water-logged.
• Step 4: Level the soil surface, removing uneven areas to assist even seed planting.
• Step 5: Eliminate soil compaction.

Reduced Till

• Step 1: This approach is similar to regular tillage, but with significantly less disturbance of the soil. Tilling is only done where needed, and the rest of the soil is undisturbed.
• Step 2: Strip-tillage or zone-tillage involves tilling and seeding in 15 cm strips leaving areas in-between undisturbed.
• Step 3: Ridge-tillage involves preparing ridges post-harvest and letting them settle over time to be planted the next seeding period; with ridges not more than 60 cm apart.

More information of each of these specific practices should be sought prior to implementation.

Crop rotation is a complimentary farming method when practicing no-tillage, as it promotes maximum biomass levels for permanent mulch cover, while controlling weeds (with pre- and post-emergent herbicides), pests, and diseases, as well as improving soil nutrition and fertility.

In addition to agricultural inputs and the following technical implementation steps, ISFM requires the farmer to consider farm size (land area), and property rights (land tenure) to ensure that investments are efficient and sustainable.

To implement ISFM approaches, the following should be considered:

• Step 1: Prepare a needs assessment based on understanding of farm challenges – low or declining productivity, soil fertility, low organic content, etc
• Step 2: Measure fields that require attention to understand volumes of inputs required.
• Step 3: Develop (or update) an agricultural calendar to use as a platform for discussion between farmer(s) extension officer(s).
• Step 4: Develop plan and schedule/programme of locally appropriate ISFM interventions between farmer(s) and extension officer(s), obtaining guidance from agricultural suppliers where necessary (lime application, etc). As ISFM is a blended approach, the plan should consider short and medium to long term interventions and outcomes.
• Step 5: Examine cost implications of the plan, revising where necessary based upon available resources, and if necessary/available apply for credit to fund investments.
• Step 6: Assess labour requirements within the ISFM plan to ensure that they can be fulfilled, and considerations of gender and youth have been accommodated – women are not expected to do the majority of work, and children are not missing school.

Organic fertilisers can be produced at the household level or purchased. On-farm production includes stock-piling animal manure, crop residues, and other organic waste, following appropriate guidance for processing and usage.

To apply organic fertilisers the following should be considered:

• Step 1: Assess field area where fertiliser is to be applied, and fertiliser needs – poor crop performance, low organic matter content, etc.
• Step 2: Ensure that fertiliser is available in sufficient quantities for application in all target or priority fields.
• Step 3: Ensure organic fertiliser – especially green manure/crop residues – are broken-down/chopped to aid breakdown/integration with soil.
• Step 4: Monitor soil nutrient levels and crop performance (in the light of prevailing climatic conditions) to determine success of organic fertilisers.