Irrigated

Integrated Pest Management (IPM) is the careful consideration of all available pest control techniques and subsequent integration of appropriate measures that discourage the development of pest populations and keep pesticides and other interventions to levels that are economically justified and reduce or minimise risks to human health and the environment, focusing on all practical options for reducing or eliminating pesticides. The practice of IPM for crop protection is widely encouraged, as the practice can enhance crop production and reduce risks associated with use, storage and management of pesticides. The integrated nature of this approach ensures that it is climate smart, as it utilises the best possible options to ensure sustainable productivity, which will in turn allow adaptation to climate change. However, as it may require the use of pesticides as one strategy, the climate-smartness may be affected.

Flooding irrigation is a practice where water is pumped or allowed to flow into channels passing between crop rows in areas where farmers have level fields. This flooding system is an effective method of managing weeds and pests, preventing the completion of their lifecycles as they are either drowned or isolated from air and sunlight. This practice is applicable in areas where there are favourable climatic conditions with high rainfall amounts; and is not recommended in arid and semi-arid environments. Flooding is controlled using water pumps in order to reduce waterlogging problems, and fields should not be entirely flooded, with surges of periodic flooding used to distribute water and avoid wastage to run-off, evaporation and creation of anaerobic conditions in the soil. Flood waters can be filtered using a fine mesh to control pests and diseases from spreading to neighbouring fields. Sandy soil is not favourable for flood irrigation as it does not evenly distribute water across the field whereas loam and clay soils distribute water efficiently across the field.

It is considered a climate smart practice because it requires less energy, and can promote crop productivity, whilst controlling weeds and pests.

The use of chemical insecticides and pesticides can be expensive and therefore not an economically viable option for small scale farmers, while also not being climate smart – widespread use of pesticides and herbicides contributes to greenhouse gas emissions. Encouraging natural predators can be an effective method for controlling and managing pests in some instances. With governments across the globe discouraging the use of chemical insecticides and pesticide products, biological control of pests is preferred and encouraged - using living organisms to control pests. Natural predators are insects that feed on pests without damaging the crop and can be found throughout the crops. Encouraging natural predators helps in supressing pests during their early and late lifecycles, improving crop production and reducing pollution caused by pesticides use. The introduction of water-fowl, such ducks in rice systems can be a highly effective form of biological control of pests. They enjoy aquatic habitats, consume insects and can even contribute to weeding as tear up weed plants as they look for food. Insect predators have different roles in controlling pests, there are predators that will control pests in the early pest lifecycle where they feed on their larvae and eggs while some are present at the late pest cycle where they feed on mature insects. Some species of ants are natural predators of stemborer pests, and wasp and some fly species larvae are parasitoids (larvae that feed on a host organism) prey on fall armyworm. One such wasp is the tiny (3 mm in length) Cotesia marginiventris which feeds on FAW caterpillars. The minute (0.5 mm in length) Trichogramma was species lays it’s eggs inside FAW eggs, killing the FAW larvae in the process. Earwigs (Dermaptera: Forficulidae, Carcinophoridae), ground beetles and ladybird beetles are also known to prey on FAW caterpillars. The issue with many of these solutions is volume of consumption, which may be too low to impact an infestation. Ants are the most important predators of FAW, as the communities consume larger quantities of FAW. However, pesticides drastically impact ant populations.

Bottle traps are an agricultural technology used to lure insects inside containers (bottles) containing bait of either food or chemical attractants. The objective is to lure pest insects to identify them for pest control, as part of overall pest monitoring, including field walks, observation and crop inspections. In larger fields they are used solely for pest identification. In smaller fields a number of traps can be used as a pest control method, trapping the insects, but this is not a common approach. Bottle traps must be installed in locations close to or amongst crops and across the farm in order to attract insects for identification and should be used throughout all cropping season to ensure that pests can be identified earlier. As a component of Integrated Pest Management, bottle traps with different lures or baits can be used to attract and identify most types of aphids and mites, fruit flies, stem borers, and fall army worm. While many of the lures and baits can be made at home or on the farm, pheromone-based baits need to be purchased from agricultural suppliers. While this introduces costs, bottle traps and lures can contribute significantly pest management, through early identification so appropriate action can be taken. This technology can contribute to climate smart agriculture objectives, as bottle traps and lures can reduce the amount of pesticides used, reducing greenhouse gas emissions; they can help with identifying new pests and insects as climates shift; and as pests are identified or reduced, productivity can increase. It is important for farmers and workers to keep records of pests identified to ensure that appropriate responses are enacted. There could be cases where infestation levels are low and the cost of taking action may be more that nominal crop losses. However, the opposite may be true, but decisions cannot be made without relevant information for extension workers to discuss with farmers.

Short-term reactive practices are control options for pests and diseases once they have reached a level where the economic losses are likely to be greater than the cost of controlling the pest/disease outbreaks and can be used to maintain or increase production. Pests and diseases are better detected at an earlier stage to make it easier to act and prevent severe crop losses and prohibit the spread of pests and diseases throughout the whole field, achieved through regular and systematic field inspections. The practice is considered climate smart as it reduces losses, which in-balance lowers greenhouse gas emissions per tonne of crop produced, it retains agricultural productivity through management of pest infestation and/or disease outbreaks, and is applicable as it can assist farmers adjust to changing climate, and the threat of new and changing pest diseases.

A push pull system is a technique that repels parasitic plants and pests that attach themselves to the crop roots and feed on them.. In push-pull, a cereal crop is intercropped with a leguminous plant like desmodium or molasses grass, while a popular fodder crop, Napier grass, is planted as a border around the field. Desmodium produces volatile chemicals that attract predators of the cereal e.g of maize pests. More importantly, by giving a false distress signal to the moths that the area is already infested, these chemicals ‘push’ the egg laying moths away from the crop to seek out habitats where their larvae will face less competition for food. Napier grass also produces volatile chemicals that ‘pull’ the moths towards them, and then exudes a sticky substance that traps the stem borer larvae as they feed. Few larvae survive. Napier grass attracts stem borer predators.  The intercropping is a climate smart practice as it mitigates emission of Greenhouse gases through the reduced need for pesticides. The push-pull system improves food security and boosts farm income.

Resistant varieties are new crop varieties that improve yield production, are resistant to pests and diseases, more tolerant to drought, salinity or other changing or undesirable environmental conditions. Crop plants used within this practice are usually only resistant to a limited number of undesirable characteristics e.g. pests or drought – but usually not both, and some other desirable traits may be lost while others may be strengthened. Hence, careful selection of candidate species must be undertaken. Resistance varieties common in southern Africa include drought resistant maize, sorghum, rice and cowpea (beneficial legume for intercropping) strains, striga (witch weed) resistant sorghum and maize strains, and others all help farmers adapt to changing climate conditions, by being able to farm crops that survive the increasingly variable climate, which can result in less rainfall, or the presence of new pests. Striga results in crop losses totalling over USD 1 billion per year, whereas research has shown that planting climate resilient maize varieties can lead to up to a 25 % increase in crop yields.

Exploring new pest or drought resistant varieties in a regional will require demonstration and testing in ‘test plots’, so extension workers can ensure that the outcomes are aligned with farmers wants/needs/tastes, and so farmers are familiar with the new varieties before they are mainstreamed. Acceptance of new varieties, and any changes is traits will be critical, as resistant varieties is a key intervention for climate adaptation in southern Africa, as they will allow farmers to remain productive for longer under challenging conditions, and while different crops altogether are investigated.

Vaccination is the administration of immunisation injections to animals in order to prevent, control spread of diseases.  Vaccination campaigns involve administration of vaccine doses to a large population over a short period of time. The veterinary services departments or equivalent of respective countries normally gives free vaccinations to the farming community's animals for diseases which are of either economic significance to people's livelihoods or those that maybe of zoonotic importance (communicable to man from animals). These campaigns are usually fully funded by the government, NGOs to reduce disease outbreaks, prevent spread of an outbreak or improve national herd productivity, and are designed to reach as much livestock as possible. In most countries, free vaccinations are offer for the following diseases: Anthrax(-Cattle), Quarter evil or black quarter disease (Cattle), Contagious abortion (Cattle), Rabies (Dogs & Cats), Foot and Mouth Disease(Cattle)_ as per OIE designation in Disease Control Zones.

 For the message to reach farmers, community radios and involvement of traditional leadership can be used to encourage farmers to participate in vaccination campaigns.  This will help to gain trust and confidence from farmers for the campaign to be successful. Vaccination campaigns is a climate smart practice as it ensures a healthy population able to utilize feed efficiently with a reduced population discharge thus reduced GHG emission.

Resistant breeds Disease resistance is the reduction of pathogen growth in or in a plant or animal; denoting less disease development in a particular breed than that which is relatively susceptible and is specific to a particular strain of disease or attribute. Breeding resistant breeds  . Resistance” means the animal actively fights infection by various means. Building resistant breeds can be done through selection. Selective breeding, sometimes called artificial selection, where different breeds of animals with desired characteristics or attributes like resistance to. drought, heat, cold, salinity, flood, submergence and pests can be developed by selective breeding and thus able to relatively thrive in some conditions which would otherwise not be able to, e.g. This assists in the reduction of diseases, results in healthier productive animals and reduces risk of secondary infections in livestock. These breeds create a potential for more efficient conversion of feed into meat or diary, and thus a climate smart attribute since by reducing emissions per unit of production (proportionately less faeces are dropped per unit consumption of feed) as well as contributing to food security.,. In the Southern African Development Community (SADC) region, local breeds are more resistant to many of the pests and diseases and may be the best option for some farmers in the Arid and semi-arid areas of the region.

Vectors are organisms that carry diseases from one living being to another without showing symptoms of the diseases themselves. Some of the most common forms of vectors are blood sucking insects such as mosquitos, fleas, lice, ticks and other similar insects, and rats/rodents. Places such as stagnant water and dumping sites can be ideal habitats for vectors to reside and transmit. The use of natural vector predators can help reduce or eliminate vector populations. The most common vectors in southern Africa are insects (tsetse flies-trypanosomiasis), animals (foot and mouth disease through cattle or people with contaminated shoes), tick-borne relapsing fever (TBRF) and Crimean-Congo haemorrhagic fever (CCHF).  Sanitising the life-cycle of vectors, implementing pest traps and introducing pest predators are means of reducing the spread of disease. The impacts of climate change, especially increased heavy rainfall and higher temperatures can encourage vector populations to grow quicker than normal. Simple strategies to control vectors includes keeping livestock surroundings clean, avoiding livestock access to stagnant water, fencing areas off, restricting animal access to certain locations, can all control biological vectors and assist in reducing vector spread.