Neutral

To effectively In Field Water Harvesting techniques, the following steps should be carried out:

• Step 1: Land is cleared, berms are developed, and crops are planted in order to direct water to the infiltration point.
• Step 2: The catchment areas should be sloped no more than 5 % and the area should be cleared to promote catchment as much as possible.
• Step 3: The infiltration pit (where water is stored) should be dug at the lowest point of the catchment areas and line infiltration pits with plastic or concrete roofing to limit water loss, and can be used as a source of irrigation for fruit trees and other high value crops.
• Step 4: Paths can be built of soil to guide water to the infiltration pit.
• Step 5: Alley cropping, or strop cropping can be used, with areas between trees and crops dug deeper like a trough to direct water to the infiltration pit.
• Step 6: To access water from infiltration pits, farmers can introduce a pumping system and water can be distributed around the farm as necessary

To effectively implement drip irrigation:

• Step 1: A reliable water source must be available - natural (natural or through rain-water harvesting).
• Step 2: Acquire a pump system (approximately $US 100) that maintains enough pressure to deliver water through the system or an elevated tank.
• Step 3: Connect lines or hoses and laterals that run from the pump system across the planted fields.
• Step 4: Run lines or hoses with emitters (drippers) or small punctures at the surface level along planted crops or just below the surface providing water to the roots system of the plants.
• Step 5: Once the system is operable, the pump can be turned on and water dispersed as required by the nature of the crop and can also be implemented with supplemental irrigation strategies (Technical Brief 23).
• Step 6: Monitor the irrigation system regularly to ensure there are no malfunctions and the system is maintained. Crops that receive regular water can develop shallow root systems and any prolonged disruptions in service could have   significant impacts.
• Step 7: If applying drip irrigation in sloped conditions, follow the contours of the slope as outlined in Technical Brief 16.

Once a drip irrigation system is up and running, farmers can explore fertigation, the addition of soluble fertilisers into the irrigation system water for distribution directly to plants.

To effectively undertake deficit irrigation:

• Step 1: Determine critical growth cycle of desired crops.
• Step 2: Experiment with SI strategies to determine critical watering times prior to upscaling.
• Step 3: Strict management is required to determine the level of transpiration deficiency allowable without significant reduction in crop yields.
• Step 4: Farmers capable of implementing deficit irrigation must have access to the minimum required water to implement deficit irrigation.
• Step 5: Farmers must have access to a reliable water source, irrigation systems, including water distribution system, sprinklers and/or drip irrigation system.

To effectively implement solar irrigation:

• Step 1: To determine the solar pump system Crop water requirements, location, water sources etc. Do required research. Is water sourced from an above ground or below ground source?
• Step 2: Source required materials to implement a solar irrigation system from regional or international suppliers including:
  • Photovoltaic (PV) panels to generate electricity (80-300 W system depending on context);
  • a structure to mount the panels;
  • a pump controller;
  • a surface or submersible water pump; and
  • a distribution system or storage tank for water.
• Step 3: Identify funding sources as initial costs, as well as maintenance costs, must be considered and modelled prior to purchasing a system. There are regional and international solar irrigation producers.   These costs differ dramatically given the complexity of the context, starting at costs approximately USD $2,400 for equipment only. If drilling is necessary the cost increases significantly depending on depth, substrate etc.  Community-based investment, micro-leasing and rental services can be possible funding models to explore.
• Step 4: Determine whether there is sufficient solar irradiation for the proposed area – consult and specialist; and/or the national meteorological service.
• Step 5: Identify area suitable to install solar panels. The area should be easily accessible, and all trees/bush should be cleared. To determine most appropriate site and angle of panels, etc, consult an expert.
• Step 6: The availability of technical expertise must be considered before implementation to ensure that any technical issues do not result in long period of service disruption.

Maintenance costs and expertise should be considered before installing solar irrigation systems. A detailed cost benefit analysis is advisable. Other key technical considerations include: Legal permits to extract water from the source as water extraction may impact community watershed levels.

To effectively undertake seed saving:

• Step 1: Communicate with national agricultural extension and local farmers regarding seed harvesting timing and practices for local crop species.
• Step 2: Clear field and sow desired crop using climate smart agriculture practices.
• Step 3: Monitor plant life cycle and ensure that seeds are extracted correctly and are not spoiled in the process. Employ local expertise to ensure seed harvesting is carried out correctly.
• Step 4: Post-harvest, seeds should be adequately dried and then transferred to proper storage facilities.
• Step 5: store seeds in dry, cool, and dark locations. This will prevent them from spoil. Different strategies for seed storage are implemented around the region so local expertise should be sought.
• Step 6: Ensure that pests are excluded from storage areas to prevent loss or spoil (Technical Brief 61-65).
• Step 7: Community seed banks or seed trading should be established to allow farmers to integrate different varieties into their farming system that are resilient to local climatic conditions

To effectively undertake leverage traditional seed characteristics, or improved crop varieties  the following should be carried out:

• Step 1: Prior to selecting seed varieties, perform a Cost Benefit Analysis (CBA) to identify how crops will perform and their benefits compared to the costs of the seed, considering the following:
  • Local  farming system(s): land availability per household, crops traditionally grown, access to inputs such as fertilisers,
  • Local environmental conditions: soil conditions, disease, pests, climatic conditions, occurrence of flooding/droughts and other natural disasters.
  • How climate change has impacted or will impact the farming system and how crop variety selection can be a climate- smart practice.
  • Local access to seeds – is seed collected at the householder level, do neighbours exchange seeds, do farmers have access to commercially produced seeds?  Are the costs for accessing commercial, improved seeds manageable or prohibitive? The CBA should weigh the benefits of a new seed against perceived actual or transactional costs for selecting a new seed.
• Step 2: Obtain information and guidance from local experts, lead farmers, and government regarding best varieties to grow.
• Step 3: Evaluate results of the CBA and select appropriate seeds that match the farm system/requirements, and available financial resources/access to credit.
• Step 4: Plant test plots of selected seeds to understand if benefits are realised and demonstrate outcomes with farmers, showing possible alternatives and discuss implementation.
• Step 5: Following full demonstration and discussion with farmers, implement at farm level – planting the first crop in accordance with guidance provided by seed provider, or traditional knowledge.

Consider in-country seed sources to access different varieties through local extension or research services. When buying seeds ensure that the seeds are adequately dry and look for seed that is certified by a national seed laboratory to ensure that the variety is the highest quality possible. Seeds should be properly stored to avoid high temperatures and humid air to reduce chances of early germination.

To effectively undertake weed control measures:

• Step 1: Review weed control measures - crop rotation, intercropping, cover crops, mulching, seed-bed preparation, livestock grazing, seed/variety selection, mowing, hand-weeding and adjustments to tillage practices - and determine which methods are available and appropriate for the farming system and farmer. Two or more of these techniques can be applied to assist in ensuring farmers have more chance of success. Understand possible negative impacts of each weed control method.
• Step 2: Improve weed identification knowledge in specific areas.
• Step 3: Prevent weeds from spreading – clean clothes, animals, machinery, vehicles to limit weed transport; use only well stored/rotted manure (4-5 months) (Knowledge Product 16), include fencing, irrigation and other farm ‘breaks’ where possible
• Step 4: Apply a combination of weed control methods including – cover crops (Technical Brief 15), mulching, intercropping (Technical Brief 07), crop rotation (Technical Brief 09), livestock grazing, seed selection (Technical Brief 20), mowing, hand-weeding. Try to avoid the application of herbicides, tillage and burning.
• Step 5: monitor and document most effective weed management strategies for each farmer, and use lessons learned from the area with other farmers where applicable.

To effectively approach to terracing construction:

• Step 1: Measure slope angle – should not exceed 25 degrees and soils should be at least 0.5 metres deep.
• Step 2: Plot the contours – see Technical Brief 16 Contour Planting for instructions for staking-out contours, and the diagram below for use of a t-stick to measure the distance between contours.
• Step 3: Start at the lowest terrace. Dig a trench vertically below the next contour, and then dig outwards to the lowest contour. Remove soil and place downhill below the lowest contour.
• Step 4: Compact soil on constructed terrace.
• Step 5: Work should then progress upslope, emptying top-soil on to the terrace below to provide soil for planting.
• Step 6: Strengthen riser buttress walls (back-walls) with stones, compacted soil, or by planting grass or trees.
• Step 7: Terrace-end drainage should also be considered, so water does not pool too heavily. The down-field gutters can be lined with stones to reduce erosion

Detailed diagrams and tables for calculating terrace dimensions are provided in Peace Corps 1986, Soil conservation techniques for hillside farming.

Additional guidance can be sought from videos provided by Access Agriculture: SLM02 Fanya Juu terraces. The Kenyan example provided is also up-slope terrace construction but using a different method where a trench is dug, and the loose topsoil is thrown up-hill (fanya juu in Kiswahili) which forms a ridge that flattens over time.

To effectively implement cover crops:

• Step 1:  Research whether locally available crops (especially legumes) provide potential options for cover crops.
• Step 2: Establish a demonstration plot could provide farmers with an example of how cover crops function.
• Step 3: Plant cover crops between primary crop growing systems to improve soil fertility, quality and nutrients.
• Step 4: Monitor soil structure, nutrient levels, and field integrity to ensure efficacy.
• Step 5: Incorporate cover crops with other climate smart practices enhance soil, including: Intercropping (Technical Brief 07), Crop Rotations (Technical Brief 09) Reduced/No-tillage Options (Technical Brief 12) etc

To effectively undertake mulching the following should be carried out. Tools required: shovel, scissors or shears.

• Step 1: Gather organic materials from the farm and other external sources if possible. grasses, crop residues, wood chips, tree backs and other plant materials.
• Step 2: Prepare a location to stock-pile mulch material. A large farm will need a substantial area or pit to achieve this. For smaller operations, mulch can be stored in open-topped barrels and bags punctured for air holes. Storage must allow moisture to contribute to the decomposition process, but no become waterlogged.
• Step 3: Chop/shred organic material and add to the stock-pile. With larger amounts of material, a motorised, or pedal driven chopper/shredder is useful.
• Step 4: Allow materials to decompose, but do not leave for extended periods as nutrients and minerals will be lost.
• Step 5: At the end of the growing season, remove any remaining weeds from the soil surface.
• Step 6: Spread mulch material over the surface approximately two centimetres deep.
• Step 7: In firmer or more compacted top soils, lightly work the mulch into the upper soil.
• Step 8: Lightly water area where mulch has been applied.

Mulch should be applied annually as mulching materials will decompose.