Moderate to Rolling

Rotational grazing is a practice of moving livestock between different units of pasture in regular sequence to allow the recovery and regrowth of pasture plants after grazing. This facilitates management of the nutritional needs of the various types of livestock whilst maintaining pasture productivity. Management of intensive grazing/controlled grazing is a climate smart practice as it results in improved forage harvest, soil fertility, resistance to drought, reduced pasture weeds establishment, reduced wastage of forage and soil compaction.

Rotational grazing can also be combined with cut and carry approaches - when managed correctly; rotational grazing can provide enough forage growth early in the grazing season for producers to harvest feed for later use in some paddocks as rotation continues. Farmers can use temporary fence systems to manage the size of, and access to pastures.

Cut and carry is the agricultural practice of cutting and carrying fodder crops away from the field that they are grown in to feed to livestock. Fodder trees, shrubs or grasses are sources for livestock feed in this practice. Cut and Carry is a key CSA practice where overgrazing is a problem. This practice takes pressure off grazing land at critical periods, reduces land degradation caused by livestock and increases soil organic matter, while still feeding livestock for productive outcomes. This practice can also be used in more intensive livestock production where livestock are kept housed for periods stretching from half a year to a year and improved nutrition is required. However, fodder production can be costly in terms of cultivation, requiring significant management over and above the livestock themselves. Fodder is collected from sites where it grows naturally, or it can be grown in fodder banks, hedges, boundaries, etc. Feeding livestock using this approach can ensure the supply of a large quantity of high quality and palatable fodder within a short time, as well ensuring soil is not disturbed through open grazing systems, thus a good CSA practice. It can be adapted to the farmer’s needs and can provide a way of introducing the farmer to the concept of improving livestock at the same time as conserving soil.

Palatability - referring to plant features or conditions that encourage animals to feed on the plant when given a choice – is important as the ability or willingness of animals to feed on specific forage determines the efficiency of production of animal products. When feed is consumed in larger quantities, depending on its nutritive value, it helps increase milk and/or meat production. Plants with stiff and harsh leaves are generally not palatable to animals, unlike those with softer leaves and grass. The nutritive value of the plant matters when it comes to palatability. Palatability will be determined by the texture, aroma, succulence, hairiness, leaf percentage, sugar content and other factors. Moreover, leaves are more palatable than stems. Palatability of plants can be increased by grazing livestock at the optimal grass growing stage before seed formation, using a High Intensity, Low Frequency (HILF) grazing pattern which allows uniform grazing of pastures and gives an allowance for regrowth and thus overall, uniform soil cover. Addressing palatability is often of greater concern during dry season, when grazing/pasture is less common, and farmers have to rely on stored silage.

Fodder is the agricultural term for animal feed. Fodder trees and shrubs play an important role in bridging the gap between livestock feed requirements and the low quality and quantity of feeds available to many farmers. As well as providing feed or acting as a feed supplement for livestock, fodder trees and shrubs supply other benefits, such as firewood and erosion control. Fodder trees are either grown in-situ, from seed, and others are planted in nurseries and then transplanted to the field at the beginning of the rainy season. The transplanting method can be more successful than the direct planting - as high as 34 % better, but with a 24 % increase in cost per plant. Benefits of using fodder trees and shrubs as a dietary supplement include improved growth, health and reproductive capacity, and increased milk and meat production, mostly through increased protean uptake. Fodder trees and shrubs can be planted as living fences, field boundaries and in tree/shrub plantations. Popular species include African acacias, and Atriplex nummularia, Cassia petersiana, C. mopane, D. cineria, F. albida, Julbernadia paniculata, P. reclinata, Piliostigma thonningii, Swartizia madagascariensis and Trema orientalis.

Farmers of all categories can use this climate smart sustainable approach to produce both livestock and field crops to obtain improve benefits, improving nutrition for livestock animals, improving soil health, reducing cost of livestock feeding, and as a result increasing income

Carrying capacity defines the number of Animal Units (AU; head of cattle or number of sheep, goats or other animals) that can graze in a rangeland unit without exhausting the vegetation and soil quality – essentially optimally utilising resources. Optimum carrying capacity is where a given unit of rangeland can support healthy populations of animal species, while allowing an ecosystem to regenerate, thus creating a sustainable balance. The stocking rate - defined as the number of animal species grazing a unit of rangeland for a limited period - must be kept fixed on an average year, meeting the carrying capacity to allow regeneration, the fallen seeds to rejuvenate and the soil to recover. However, stocking rates can fluctuate depending on the nature of the vegetation, rainfall variability, herd composition and management system. If the conditions are not favourable for vegetation growth during drought season, the number of livestock or the grazing period must be adjusted to avoid overgrazing. Moreover, the purpose of livestock keeping, i.e. for milk, meat, or wool production, will determine the carrying capacity of a rangeland unit. Factors such as climatic zone, rainfall dependency, class of livestock (steer, dry cow, calves, lactating cow and bull, etc), health of grassland and animal species affect the stocking rate. While relevant in all climatic zones, it is more applicable in arid and semi-arid zones where rainfall is most scarce. This climate smart practice increases production (meat/dairy), increases pasture resilience to extreme climate hazards (drought) and enhances soil fertility.

General Feed Supplements are used to increase nutrients in livestock diets, with the aim of maintaining or improving livestock health through adequate animal nutritional balance and therefore productivity of milk or meat. These supplements include vitamins, amino acids, minerals, and other nutrients. Supplementary feeding can becoming either a regular part of the production cycle to help match feed demand to feed supply, assisting livestock farmers meet production requirements as defined by market specifications, or reserved for times of shortage during dry spells and/or droughts. The extent to which supplementary feeding is applied depends on the farm/business objectives and seasonal conditions. This is especially true in areas of low-quality crop residues and low quality pasture land.

Feed supplements are presented in granular, powder or block form and used during milk production and fattening stages for meat production. However, if consumed in excess feed supplements can be harmful to animals causing toxicity and if persistent, death.

Improved protein content in animal feed can positively impact productivity, such as the quality and quantity of meat and milk.  With the increase in global demand for meat and dairy products, the increase of protein in livestock diets is extremely important. Key to the absorption of protein in livestock diets is the improved digestibility of protein. For protein to be utilised efficiently by livestock i.e. consumed and converted into body protein and resulting in bigger and better-quality meat, certain amino acids need to be present. Thus, to maximise protein deposition in livestock, the required amino acids must also be included in the feed. Amino acids have been added to livestock feed for over 40-years. The most common amino acids added to feeds are Methionine, Lysine, Threonine, and Tryptophan. With the expansion of inexpensive plant-based proteins (soybeans etc.) and increasing demands for meat, plant-based proteins offer an alternative or supplement to amino-acids, contributing to greater efficiency of conversion of proteins from feed to meat. Plant-based proteins also require less monitoring than synthetic additives, but amino acids are often needed to maintain digestibility. Improved livestock productivity and conversion is climate smart because there is more efficient conversion of food to weight gain and less livestock pressure on land, supporting a more efficient value chain.

Non-Conventional Feeds (NCF) are either traditional or commercial animal feed-types that are not traditionally utilised as animal feed. These feeds are generally in one of two categories: by-products of agroecological industrial processes, or plants/plant materials from other processes. Examples of industrial by-products include groundnut cake, molasses and cotton seed meal, which are outputs from other processes and are found in proximity of manufacturing points, but often have a short shelf-life. Plant materials can be vegetable peels or locally available crop residues such as maize stalks and other remaining parts of harvested plants not consumed by humans. NCF decrease the demand of land to grow fodder, act as an alternative source for animal feed, resulting in the decrease of food competition between animals and humans ensuring food security. Furthermore, the use of bi-products optimises the use of raw materials and can increase profitability for the producer and the farmer.

Grains are stored to reduce the opportunities for loss, damage or infestation by pests. On the farm grain storage can be short-term (>3 months) before it is moved to the supply chain, long term (3-12 months) while farmers store it for home consumption, to sell when prices are more favourable or for planting in the next season. During this phase of post-harvest processing, grains can be stored in bags, silos or other bulk storage containers. Bag storage utilises permeable sacks that will allow air movement in and out of the bag. Structures can be built to store grains and solid-wall bins or silos should be used in areas where grains can be dried properly. Other options include airtight underground pits, steel bins, while concrete silos and warehouses can also be used as storage options. While storing grains to ensure favourable storage, facilities should be kept clean, covered, and never exposed to the elements.  However, pest control measures need to be established, such as adhering to acceptable grain moisture content levels at storage to deter insect infestation, as pests (rodents, insects, etc.) can devastate grains in storage. Physical storage options are built to meet the demand and supply of grains season-to-season and to make seeds available for the next planting season.

Drying techniques are agricultural practices applied to assist with the balance of moisture in grains post-harvest, determined by a combination of ambient temperature and relative humidity. Spoiling due to insufficiently dried grain is one of the main causes of grain deterioration, loss in grain quality, and thus market value. Grains have the capability to absorb or evaporate moisture, and a balance of moisture content in the air and grains should be sought to achieve an Equilibrium Moisture Content (EMC). EMC prevents the formation of moulds that may affect the quality of grains, spread of pests and germination of grain seeds. After harvest, transportation and threshing, grain needs to be further dried to be preserved. Natural drying techniques are based on ambient air circulation to reduce the moisture content of the grain before storage. Artificial drying techniques apply fans and/or heating elements to move air and maintain constant temperatures .Natural drying (sun drying) is the preferred, commonly used agricultural technique in southern Africa and does not require use of machinery. Drying techniques preserve the contents of seeds thus assuring sustainable agricultural productivity and the practice as climate smart.